Panasonic UT-MA6 Series Operating Instructions Manual page 24

Troubleshooting (Basic)
n Others
No response.
Cannot connect to a
network.
24
l Open Task Manager and close the software application that is not
responding.
l An input screen (e.g., password input screen at startup) may be
hidden behind another window. Touch the application icons at the
bottom of the screen to check.
l Press the power switch for four seconds or longer to shut down the
computer, and then press the power switch to turn it on. If the ap-
plication program does not work normally, uninstall and reinstall the
program. To uninstall,
A Open the Control Panel.
1. Touch (Start) - [Control Panel].
B Touch [Programs] - [Uninstall a program].
l When connecting a peripheral device to use with this computer for
the first time, updating the driver may take a few minutes. Please
wait it is completed.
l By a strong radio waves noise from the outside, touchscreen may
not work properly.
Ÿ If a device that emits strong radio waves near this product,
should be kept away.
Ÿ Make sure that the grounding of the AC plug is connected prop-
erly.
Ÿ If source of the radio waves cannot be kept away, please operate
it with an external mouse.
l Set the device ([Wireless LAN] / [Bluetooth] of [Wireless Configu-
ration]) to [Enabled] in the [Advanced] menu of the Setup Utility
(Wireless Configuration).