Page 1
UT-MB5 Series / UT-MA6 Series Touch Screen Control Panel V1.02L13M03 Installation Procedure This document describes how to install Touch Screen Control Panel V1.02L13M03 for above models running Windows 7 / Windows 8.1. Please read this document carefully before install it.
Page 2
Touch "PC Information Viewer" in "Panasonic" menu. (2) Touch the "Programs2" tab, and check existence and the version of “Touch Screen Control Panel”. Procedure for installation 4.1 Download the installation program (1) In the same site where you download this document, download the installation program, tscp_1.2.1300.3_utmb5_utma6.exe.
Page 3
(2) If User Account Control Window appears, Touch [Yes]. (3) Install Touch Screen Control Panel by following the on-screen instructions. If reboot is required, reboot PC. 4.5 Confirm the version of Touch Screen Control Panel Confirm that the version of Touch Screen Control Panel is V1.02L13M03, by the procedure described in chapter 3.
Page 4
5.2 Touch Screen Switch Utility (1) (Windows 7) Touch[(Start)]-[All Programs]-[Panasonic]-[Touch Screen Switch Utility] (Windows 8.1) Swipe up from the center of the start screen. Touch "Touch Screen Switch Utility" in "Panasonic" menu. (2) Follow the on-screen instructions. [End Of Document]...