Introduction; Ecgo-Gkp Specifications - East Coast Gate Operators ECGO-GKP Setup Manual

Introduction

The ECGO-GKP 4G is a telephone entry system installed at the entrance of a building or outside of a gated area. It is
an ideal product to consider as a replacement for a traditional phone entry for the following reasons:
• very easy to install and works well with all gate operators
• allows the owner to save up to 1,150 phone numbers and/or 400 pin codes for family and visitors
• provides the ability to contact up to 3 owners on a cell or landline and will "roll-over" from the first, to second
to third when the "CALL" button is pressed
• sends report phone numbers and pin codes that enter the gate via text message to a specified number
• no trench required for phone line!
The ECGO-GKP gives you the opportunity not only to know who is waiting at the entrance from a remote location
but to also control the access point. Use of ECGO-GKP at your company or house does not require any special
installation and wiring. Simply install the unit and connect the output to gate operator and power supply.
Operating Voltage
Operating Current
Frequency
Humidity
Operating Temperature

ECGO-GKP Specifications

12 to 24 Volt DC/AC ONLY""
Maximum 250mA, Typically 55mA
850/900/1800/1900 or 900/1800 MHz
Less than 80% RH
-20℃ to 50℃
4 | P a g e