Operating The Ecgo-Gkp; Ecgo Warranty - East Coast Gate Operators ECGO-GKP Setup Manual

Operating the ECGO-GKP

Once configured either thru the ECGO app or text messaging described above, when a visitor pushes the call button
to activate the ECGO-GKP, a ring tone will be heard from the unit. If the primary owner number is busy or does not
answer, the call will "roll" to the second, then the third. Once the owner is reached, the conversation can begin from
the units' intercom. By default, calls can be "active" for one minute. The call is "active" from the time that the call
is attempted. When on the call, the owner can activate the gate configured to use Relay 1 by selecting the options
here:
• to open gate, press *
• to hold gate open, press #
• to release the "hold", press 1
To release the hold after the conversation has ended, text *35*5678#
If Relay 2 is used, the following applies:
• to open gate, press 7
• to hold gate open, press 8
• to release the "hold", press 9
To release the hold after the conversation has ended, text *35*5678#

ECGO Warranty

ECGO Inc warranties the unit from manufacture defects for one year and takes no responsibility for misuse, issues
as a result of wiring incorrectly, surge, lightning strikes, incorrect power supply, water damage, or vandalism.
For technical help please call your gate installer or ECGO, Inc. at 704-588-4399.
16 | P a g e