Electrolux EQE6000SA User Manual page 9

REMOVING FEATURES
Crisper Bin
Removal (standard Crisper Bins):
1. Empty food from the crisper. On some models it will
be necessary to remove the bottle storage bins.
2. Remove the crisper bin(s) by pulling forward, then
up and forward again.
3. For top mount and single door, remove the crisper
shelf by lifting the catches on the left and right
underside of the shelf and pulling the shelf forward.
CATCH
SpillSafe™ glass shelves
To remove the shelves, gently pull them forward until the
shelf comes clear of the shelf guides. To return the shelf,
make sure there is nothing behind that may obstruct
movement. Gently push the shelf, into the cabinet and
back into position.
Drawers fitted with telescopic slides
To remove the drawer for cleaning.
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward and lifting
the front to unhook it from the slides. Once you
have removed the drawer, ensure the slides are
pushed back so they are fully closed.
Twist and Serve Ice
Mounting the twist & serve dispenser to the other side
of the freezer.
NOTE: this is only possible on Top mount models.
1. Remove the ice bin and ice cube tray. If the ice tray
assembly is frozen to carriage, simply squeeze the
tray and shelf together to break the ice.
2. Before you remove the ice carriage, remember to
disengage it from the glass shelf as it may result in
damage to the assembly.
3. Remove the centre runner by disengaging it at the
front of the shelf, and removing it from the rear.
4. Refit the runner into the rear of the shelf on the right
hand side and then engage the front.
Insert into the slot at the
rear of the shelf
5. Fit the carriage by sliding it into the runners until the
front if the carriage engages with the shelf.
6. Refit the ice tray and ice bin.
WARNING
Fill the ice cube tray with potable water only.
English 9
Then engage into the
front of the shelf