Deleting A Point - DCS LDT-R1 User Manual

Saving a Lens Table
Once all the required values have been encoded, click on 'SAVE' to save the lens
table.
A message will prompt upon successful completion.
Edit a Lens Table
A lens table can be edited. New points can be added, existing points can be removed
or a lens table can be permanently flipped.
Choose: Menu > Edit Lens.
Deleting a Point
If a point gets added by mistake or needs repositioning it can be removed.
In order to delete an existing point push the joystick to the left. Move the controller to
the desired point. Push the joystick to remove the point.
Press the back button to go back.
Flipping a Lens Table
If an axis map needs to be permanently reversed push the joystick to the right, then
push the joystick to confirm.
LDT- R1 User Manual
29