Creating A New Lens Table - DCS LDT-R1 User Manual

Type the new focal length or focale range. Use the joystick up/down to scroll through
the numbers. One click for a single increment, hold for rapid scroll.
If it is a zoom lens, click right to finish typing the focal range.
Once the focal length or focale range is entered, press the back button to go back to
the focal range list and select one to proceed.
Enter a new lens serial number. use the joystick up/down to scroll through the
available characters. One click for a single increment, hold for rapid scroll. Click right
to type the next character.
Once the serial number is entered, press the back button to proceed.
Creating a New Lens Table
Mapping a new lens table is crucial to ensuring that the data encoded throughout the
production is precise.
LDT- R1 User Manual
24