Flipping Gui; Homepage Functions - DCS LDT-R1 User Manual

Flipping GUI
If, for rigging purposes, the LDT-R1 requires to be rigged upside down, the GUI can be
flipped.
Choose: Menu > Settings > Advanced > Flip GUI > Yes.
Homepage functions
The homepage comes up when the LDT-R1 powers up. There are four pages.
Note:​ Depending on the REC Mode selected, the homepage layout differs.
System Status
This page is to check the status of the
SD Card and the Preston Connections
Selected lens
Once a lens is loaded, it will be possible
to check the lens details here
Lens details
Once a lens is encoded the screen will
display a real time readout of the three
axis'. Push the back button to switch
between units measured (feet/metres),
Motor Status
From this page the motor connection
can be checked.
None: No motor detected
Caling: Motor is calibrating
OK: Motor is ready
On the homepage: joystick Up/Down controls the brightness of the LDT-R1 screen.
LDT- R1 User Manual
11