Table of Contents
Advertisement
8. OPERATION
The device starts the automatic station search and saves
all
found channels.
Please note that the reception sensitivity and the related number
of radio stations found depends on the search sensitivity settings.
E
For FM search sensitivity settings, refer to chapter 7.1.14.2.
Manual FM search
You can also search for FM stations manually.
To do this, use the ▼▲ buttonson the remote control to increase
or decrease the reception frequency step by step in 0.05 MHz
increments.
8.4.2. FM radio operation
To access the stored radio stations, press the ▸ ▸I or II◂ ◂button.
Alternatively, you can also call up the first 5 stored stations using
the station memory buttons 1-5 on the unit.
If you want to change the assignment of the station memory
buttons, press the ◄ or ► button to perform a scan for the next
receivable station. If necessary, repeat this step until you have
found the desired station. Then press the desired station selec-
tion button 1- 5 (see chapter 4) for approx. 2 seconds.
The station is now stored on this button.
Please also read chapter 9.8 about saving favourite stations.
Operating Manual
172
Advertisement
Table of Contents
