Table of Contents
Advertisement
SAFETY PRECAUTIONS
BEFORE INSPECTING PNEU-
MATIC EQUIPMENT, CUT OFF
THE AIR SUPPLY AND EXHAUST
AIR FROM THE COMPONENTS.
You will have serious injury if the residual pressure
actuates the machine.
Before inspecting pneumatic equipment, cut off
the air supply and exhaust the air from the
equipment.
Switch OFF the power.
M02EB
DO NOT ALLOW ANY PERSON WHO
HAS NOT RECEIVED SPECIAL
TRAINING TO OPERATE THE MA-
CHINE.
The machine may be operated improperly and
injure you.
Either carry out training by yourself, or consult
the manufacturer.
M11E
DO NOT TURN OFF THE SERVO
SWITCH DURING
OPERATION.
The machine may get out of control and injure you.
Before turning OFF the servo switch, bring the
machine to a temporary stop state, such as a
single stop state and a cycle stop state or an
operation stop state.
M62EB
4H4C-E-OMA00-A03-01
Be sure to observe
WARNING
ONLY THE PERSON IN CHARGE OF
MAINTENANCE MUST REPAIR OR
ADJUST THE MACHINE.
The machine may be incorrectly repaired or ad-
justed, resulting in malfunction.
Have the machine repaired or adjusted by a
trained professional maintenance engineer.
Consult the manufacturer for training.
M08E
DO NOT PLACE YOUR HANDS OR
BODY INSIDE ACTIVE PART OF THE
MACHINE WHEN IT IS IN A SINGLE
STOP OR CYCLE STOP CONDITION.
The machine has been stopped only temporarily.
You may be injured if the sensors are actuated and
the machine moves unexpectedly.
Turn OFF the servo switch before placing your
hands or body inside the active part.
M34EB
DO NOT MOVE ANY AXES (INCLUD-
ING HEADS) MANUALLY WHILE
TURNING OFF AND THEN ON THE
SERVO SWITCH UNDER A SINGLE
STOP, CYCLE STOP OR MACHINE
ADJUSTMENT MENU.
The machine may be actuated suddenly and injure
you when the servo switch is turned on.
If any axes (or the heads) are moved, press the
emergency stop button, and then reset the
switch. Restart operation through the main
menu.
M63E
Page 19
Advertisement
Table of Contents
