Advertisement
•
Close filter valve when all oil is back in cook pot and air bubbles are appearing - then
wait for 2 seconds and turn POWER switch to ON.
•
Turn the POWER switch to ON, display reads COOL.
•
Open the filter valve and turn PUMP switch ON
Add Oil if Required
•
Oil level must be above the heating elements, and should be on the lower oil level
mark in the cook pot before heating. Add fresh oil as required. The POWER switch
should still be ON, display reads COOL.
Prepare Cooker for Next Cook Cycle
If cooking immediately
•
Turn POWER switch to ON. Press EXIT FILL, EXIT COOL, and appropriate product
button
•
Oil must not be lower than the MIN line before heating the cooker. Add fresh oil as
required.
If not cooking for the next 30 minutes
•
Press EXIT FILL and leave in COOL mode, or press head quantity button that was
previously selected, twice.
Empty Condensation Pan
•
Empty the condensation pan during the day as needed.
•
Skim off oil and grease and put in waste oil container.
Advertisement
