Advertisement
•
Close filter envelope by folding its 2 top corners at 45-degree angles, followed by
folding the flap over twice to close the opening.
•
Slide the filter clips over the folded edge, with the folded side on top and the flat side
on the bottom.
•
Put crumb catcher screen over filter envelope
Thread Standpipe onto Connector Nut
•
Insert the connector nut through the hole in the center of the filter paper, and thread
the standpipe onto the connector nut. Position so the standpipe lines up with the
connecting union in the cooker.
•
Hand-tighten the connector nut.
Advertisement
