Stopping/Restarting Your Washer - Whirlpool LSR7233DQ0 Use And Care Manual

8.(OPTIONAL S TEP)If desired,on
modelswith the end-of-cycle signal
option,setthe CLEAN TOUCH
TM
Cycle Signal to On if you want the
washer to alert you when the wash
cycle is complete.
• The signal is helpful when you are
washing items that should be removed
from the washer as soon as the cycle
ends.
9. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle
you want. See pages 9 and 10.
m
Cycle _lVUl
Options
CLEAN TOUCH
Selector
10. Pull out the Cycle Control Knob to
start the washer.
11. (OPTIONAL STEP) If desired, on
models with no liquid fabric softener
dispenser, add measured liquid fabric
softener to the rinse water.
See page 14.
Stopping/restarting your washer
• To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid (if
necessary) and pull out the Cycle Control
Knob.