Ultra electronics HYPERSPIKE HS-14 RAHD Operation And Maintenance Manual page 19

Enter the IP address of the device you would like to add in the "IP Address/Hostname" field,
and enter an identifying name for the device in the "Name" field. If you don't know the IP
address of the device, consult your network manager. If the device has not already been
configured, the CCI will automatically copy the master Username and Password to it. After
completing this step for every HS-14 RAHD on your network, all of the devices will share a
common username and password.
Once IP Address and Name information is supplied, the new device should appear on the
Home Screen. After appearing on the screen, inspect the color of the "Status" indicator next
to the Device Name.
The three color codes for the status indicator are as follows:
- Green – All systems functional
- Red – Connection not established
- Orange – System fault
Copyright © "RSB Group", Moscow, Krzhizhanovskogo str., 14/2
90169A-MAN-HS14RAHD
HyperSpike
Figure 5.3-1 Add Device "+" Button
Figure 5.3-2 Add Device Popup Window
®
HS-14 RAHD Operation and Maintenance Manual
14
Rev A