Table of Contents
Advertisement
Assembling and fitting the rotisserie spit
B
Fit the claws onto the rotisserie spit with the claws facing inwards
(figs. 5 & 6).
Fit the thumb screws into the holes in the claws and turn until secure
(fig. 6).
Note that the spit has different shaped ends – see end 'A' and end 'B'
in the diagram above. End A is fitted first into the socket on the right
hand side of the oven before fitting end B into the bracket on the left
hand side of the oven (fig. 7).
Always use the rotisserie handle to remove the spit from the oven
when hot. Place the hooked ends of the rotisserie handle under the
spit and into the notches (figs 8 & 9) and lift out.
Fig. 8
Issue 1a 2/5/2019
10
Fig. 5
A
Fig. 6
Fig. 7
Fig. 9
Hide quick links:
Advertisement
Table of Contents
