Advertisement
48959 Rev1
25/5/06
fl
›
‹
¤
⁄
Your hand blender is designed to help you prepare
everything from soups to chocolate mousse and
crush ice quickly.
The hand blender can be used with the measuring
jug or a saucepan.
A
B
4
13:35
Page 6
fi
‡
·
‚
Features
⁄ Blender leg
¤ Release button
‹ Blender body
› Turbo switch
fi On/off switch
fl Speed control
‡ Wall mounting bracket
· Wall mounting screw and
wall plug x2
‚ Measuring jug with storage
lid
Unpacking your hand
blender
WARNING: Carefully unpack
your hand blender, blades
are very sharp.
Wash all parts, with the
exception of the blender body,
before first use. See cleaning
instructions page 5.
www.morphyrichards.com
Assembling the
blender leg
Insert by pushing the blender
leg into the blender body, until it
clicks into place.
To remove the blender leg press
the release button.
Using the hand
blender
WARNING: Make sure that
the hand blender is
switched off and unplugged
from the mains.
1
Clean the blender leg before
using it for the first time with a
damp cloth.
2
Insert the blender leg into the
main housing and click into
place A.
3
The hand blender can now be
plugged in and is ready to use.
4
Place the blender leg into the
food to blend, select the
required speed for your food on
the speed control, then press
the on/off button B.
Release the on/off to stop
blending.
5 After use, unplug the blender
and remove the blender leg by
pressing the release button and
pull gently away.
6
Give the blender leg a rinse with
cold water. If the main body has
been splashed just give it a
wipe with a damp cloth.
WARNING: Your hand
blender is designed for
intermittent use. Do not use
non-stop for more than 1
minute. Allow to cool down
for a minimum of 5 minutes
before further use.
Using for Ice
crushing
The blender leg is fitted with a
special blade suitable for
crushing ice. It can be used to
crush ice cubes to produce fine
ice for cocktails, cold drinks
etc.
1
Place a maximum of 4 ice
cubes in the plastic measuring
beaker.
2
Press firmly down on the ice
Advertisement
