Klein ENG Series Installation Instruction page 5

GB
Installation instruction for radial blowers for areas subject to gas and dust explosion hazards
Purpose of the Installation instruction
This Installation instruction accompanies the equipment. It also contains the Installation
instruction.
The Installation instruction was prepared by the manufacturer on the basis of their
knowledge and experience with design, production and operating procedures.
The operating entity may supplement this manual with special instructions (for instance for
supervisory and reporting duties, operating specific maintenance and care schedules), in
particular to establish special cleaning intervals to remove dust deposits on the motors.
Symbols used in this Installation instruction
The graphic representations and drawings are basic illustrations of a blower. They are not to
scale and do not correspond to the proportions of all blowers in the product range.
These illustrations are only intended as a guide.
Detailed dimensions and views are shown in the catalog.
Copyright
The copyright for this Installation instruction remains with KARL KLEIN Ventilatorenbau
GmbH.
This Installation instruction may not be reproduced in whole or in part without prior approval
by KARL KLEIN Ventilatorenbau GmbH.
07/2019 KARL KLEIN Ventilatorenbau GmbH
Page 4