Transportation And Storage - Klein ENG Series Installation Instruction

GB
Installation instruction for radial blowers for areas subject to gas and dust explosion hazards

Transportation and storage

4
Instruction!
To transport and install the equipment safely, a suitable lifting strap should be used. The
blower should be secured in such a way that balance is maintained.
Only transport the equipment with suitable rigging and lifting implements. Prevent the blower
from tipping.
The lifting eyes on the blower housing are not intended as the sole means of lifting the entire
blower. The motor must always be secured separately!
Attention!
During transport, body parts are subject to a crushing hazard between the blower and the
surroundings.
Instruction!
Dispose of packaging materials properly. Do not burn them.
Storage instructions!
Before transporting the blower to the installation site, the equipment should only be stored in
enclosed, dry areas.
Storage in open spaces that are protected by roofing is permitted for only short periods.
The blower must be protected against damaging environmental influences and mechanical
damage.
07/2019 KARL KLEIN Ventilatorenbau GmbH
Page 13