Q427+ Disassembly guide 2: CAUTIONS Flashing & Servicing must be undertaken by qualified personnel only. Ensure all work is carried out at an anti-static workstation and that an anti-static wrist strap is worn. III. Use only approved Tools & components as specified in the parts list. IV.
Page 3
Q427+ Disassembly guide 2、 by hand. Tear off the IMEI label 3、 Unscrew the screws by screw driver.
Page 4
Q427+ Disassembly guide 4、 Unmount the back cover by pick. 5、 Take out the LCD/TP/Main/volume key FPC connector by tweezers.
Page 5
Q427+ Disassembly guide 6、 Unscrew the screw by screw drive. 7、 Unmount Main PCBA by hands.
Page 6
Q427+ Disassembly guide 8、 Unmount the RF coaxial line by tweezers. 、 Remove the main camera by tweezers.
Page 7
Q427+ Disassembly guide 10、 Remove the receiver by tweezers. 11、 Remove silicone gel cover for proximity sensor by tweezers.
Page 8
Q427+ Disassembly guide 12、 Remove the battery tape by tweezers. 13、Remove the battery by hands.
Page 9
Q427+ Disassembly guide 14、 Remove the volume key FPC by tweezers. 15、Remove the RF coaxial line by tweezers.
Page 10
Q427+ Disassembly guide 16、 Remove the main FPC by tweezers. 17、 Remove the fingerprint FPC by tweezers.
Page 11
Q427+ Disassembly guide 18、 Remove the vibrator by tweezers. 19、 Remove the small PCBA by tweezers.
Page 12
Q427+ Disassembly guide 20、 Remove the fingerprint keying tray by tweezers. 21、 Remove the Fingerprint Reader silicone key assembly by tweezers.
Page 13
Q427+ Disassembly guide 22、 Join clean up solvent 23、 Use heat gun to heat the TP 200°C.
Page 14
Q427+ Disassembly guide 24、 Remove the TP/LCD by tweezers. Finished. Thanks For any Query or suggestion, Please write to tech.help@micromaxinfo.com...