Page 1
Q427+ IMEI Writing Procedure IMEI Writing Procedure 1:Technical Specifications Particular Remarks Key Matrix For Flashing Chipset MT 6735P Android Version Android 6.0 Frequency 1.3GHz 2G: 8 0MHz/900MHz/1800MHz/1900MHz Network Mode 3G: B1 B8 Data Segment GPRS, EDGE, HSPA+ 21Mbps, FDD-LTE, TDD-LTE Internal SD Card memory Expandable Memory Press vol+/ Vol-/ power key at the same time...
Page 2
Q427+ IMEI Writing Procedure 2、IMEI Writing 1. Install USB driver. The driver needs to be installed before using the USB cable. 1> computer eject hardware installation instruction and choose following item and then click’’next step’’ Choose this...
Page 3
Q427+ IMEI Writing Procedure 2> click ‘’browser’’ and choose the driver saved path’’ USB VCOM-Driver’’ and then click confirm and next step. Choose usb driver...
Page 4
Q427+ IMEI Writing Procedure SN_Write_tool_exe_v1.1516.00_All_In_One 1:Open connect software upgrading cable to the unit and PC, press the “System Config” button...
Page 5
Q427+ IMEI Writing Procedure 2:Choose Modem Databse file and AP Databse Choose Modem Databse file and AP Databse...
Page 7
Q427+ IMEI Writing Procedure 4>:Input IMEI into below dialogue bar, click’’OK’’, Keep the phone at “power off”condition, and then connect the phone to the computer, and the phone will inter the META mode automatically, it begin to write IMEI number to the unit , the IMEI has been successfully write into the unit.