Q427+ Assembly guide 2: CAUTIONS Flashing & Servicing must be undertaken by qualified personnel only. Ensure all work is carried out at an anti-static workstation and that an anti-static wrist strap is worn. III. Use only approved Tools & components as specified in the parts list. IV.
Page 3
Q427+ Assembly guide 3、 Install the fingerprint keying tray by tweezers 4、 Install the PCBA by tweezers.
Page 4
Q427+ Assembly guide 5、I nstall the fingerprint FPC by tweezers. 6、 Install the vibrator by tweezers.
Page 5
Q427+ Assembly guide 7、 Install the FPC by tweezers. 8、 Install the RF coaxial line by tweezers.
Page 6
Q427+ Assembly guide 9、 Install the silicone gel cover for proximity sensor by tweezers. 10、 Install the receiver by hands.
Page 7
Q427+ Assembly guide 11、 Install the volume key FPC by hands.. 12、 Install the front camera by tweezers.
Page 8
Q427+ Assembly guide 13、 Install the camera by tweezers. 14、 Install the PCBA by tweezers.
Page 9
Q427+ Assembly guide 15、 Fasten the screw by screw drive.. 16、 Install the FPC connector by tweezers.
Page 10
Q427+ Assembly guide 17、 Stick the battery tape by tweezers. 18、 Install the battery by hand..
Page 11
Q427+ Assembly guide 19、 Install the back cover by hand. 20、 Fasten the screws by screw driver.
Page 12
Q427+ Assembly guide 21、 Stick the IMEI label by hands. 22、Install the battery cover by hand. Finished. Thanks For any Query or suggestion, Please write to tech.help@micromaxinfo.com...