Advertisement
3. Select cycle and wash tlms
Start the washsr
l
Push in the Cycle Control Knob and
turn it dfxkwlse.
l
Stop when the indicator on the
knob's outer ring points to the
number in the wash cycle you want.
The numbers are minutes of wash
time.
l
Start the washer by pulling out the
Cycle Control Knob. The washer will
fill to the selected water level with
the selected wash water tempera-
ture. The washer will begin agitating
Immediately after filling. Agitation
can ofxur with the washer lii up or
down.
l
To stop the washer at any time, push
in the Cycle Control Knob. To restart
the washer, pull out the Cycle
Control Knob.
Wh!; happens in each
Each cycle has been designed for
different kinds of fabrics.
When the Cycle Control Knob is
set to a number and pulled out, the
washer fills before agitation and timing
starls. After agitation starts, the knob
turns clockwise until it points to OFF
and the cycle ends.
The washer will pause briifly
throughout each cycle. These pauses
are normal for washer operation.
Gentle Wash System
For better fabric care in the REGULAR
and PERMANENT PRESS Cycles, the
agitation speed is reduced during the
last few minutes of wash agitation
time.
5
Advertisement
