Hardware Installation - NEC 78K0R/L 3 Sense it! Series User Manual

78K0R/Lx3 – Sense it!

5. Hardware installation

After unpacking the 78K0R/Lx3 – Sense It! demonstration kit, connect the board via connector USB1 to your
host computer using the provided USB interface cable. When TK-78K0R/LH3+LCD board is connected, the
USB driver needs to be installed on the host machine. Please refer to the following USB Driver Installation.
_______________________________________________________________________________________________
U20191EE1V0UM00
User's Manual
24