Installation Requirements; Tools And Parts; Options - Whirlpool Duet 461970255001 Use And Care Manual

Tools and Parts

Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
■ Pliers (that open to 1 9 / " [39.5 mm])
16
■ Flashlight (optional)
Tools needed for connecting the drain hose
■
Locking pliers (that open to 1
Tools needed for installation
■ Open end wrenches 17 mm and 13 mm
■ Level
■ Wood block
■
Ruler or measuring tape
Parts supplied:
A
D E
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Transport bolt hole plug (4)
Alternate Parts
Your installation may require additional parts. If you are interested in
purchasing one of the items listed here, call the toll-free number on
the cover or in the "Assistance or Service" section.
If You Have You Will Need to Buy
Laundry tub or Sump pump system (if not already
standpipe taller than available)
96" (2.4 m)
Overhead sewer Standard 20 gal. (76 L), 30" (762 mm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain Siphon break, Part Number 285834;
additional drain hose Part Number
8318155; and connector kit, Part Number
285835
Drain hose too short 4 ft (1.2 m) drain hose extension kit, Part
Number 285863
Water faucets 2 longer water fill hoses: 6 ft (1.8 m) Part
beyond reach of fill Number 76314, 10 ft (3.0 m) Part
hoses Number 350008
4

INSTALLATION REQUIREMENTS

9 / " [39.5 mm])
16
B
C
F
G
E. Beaded strap
F. Drain hose
G. Hose clamp
Pedestal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (254 mm) or a
15.5" (394 mm) pedestal. These pedestals will add to the total height
of the washer for a total height of approximately 48" (1219 mm) or
53.5" (1359 mm), respectively.
A
A. 10" (254 mm) pedestal
B. 15.5" (394 mm) pedestal
To order, call the dealer from whom you purchased your washer or
refer to the "Assistance or Service" section.
Pedestal Color
Height
10" (254 mm) White
10" (254 mm) Black
10" (254 mm) Diamond Dust (Silver)
15.5" (394 mm) White
15.5" (394 mm) Black
15.5" (394 mm) Diamond Dust (Silver)
15.5" (394 mm) New Aspen (Light Green)
15.5" (394 mm) Tuscan Chestnut
15.5" (394 mm) Ocean Blue
15.5" (394 mm) Cranberry Red
15.5" (394 mm) Lunar Silver
Stack Kit
Are you planning to stack your washer and dryer? To do so you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer
or refer to the "Assistance or Service" section. Ask for Part
Number 8541503.

Options

B
Part Number
WHP1000SQ
WHP1000SB
WHP1000SU
XHP1550VW
XHP1550VB
XHP1550VU
XHP1550VA
XHP1550VC
XHP1550VE
XHP1550WR
XHP1550WL