Advertisement
Lantronix Xport Guide IC2001/4001 Controllers
Part 2 – Changing controller/Xport defaults
Now that we have the controller setup with the correct IP address, Subnet and gateway we need to change
certain elements of the Xport so that the controller can communicate with GuardPoint Pro.
To view the newly changed information we click on the "Device Details" tab in the right hand pain of the De-
vice installer.
Here we can check all aspects of the Xport. However we still need to check and change the serial bus channel
of the Xport. This can be done with either of the 2 methods provided from the Device installer.
Web configuration or Telnet configuration.
sales@sensoraccess.co.uk
www.sensoraccess.co.uk
+44 (0) 1273 242 355
Advertisement
Need help?
Do you have a question about the IC2001 and is the answer not in the manual?
Questions and answers