Advertisement
Lantronix Xport Guide IC2001/4001 Controllers
First I enter my choice for Channel 1 and press enter.
I am now presented with
Baudrate (9600)?
At this point you can enter another Baudrate if I wish and then press enter. As I want to leave the Buadrate as
9600 I press enter and move to the next definable heading, which in this case is:
I/F Mode (4C)
Again as I want to leave this as it's currently set I would press enter and move on to the next heading.
Work through the headings referring to the Web configuration section and change what is outlined in that sec-
tion.
Once you have come to the end of this menu you will see the main Telnet menu again.
You now have 2 choices.
Exit without saving
Save and exit.
If you wish to save your changes enter 9 and press enter.
If you are not comfortable using the telnet configuration use the Web Configuration to make any changes
This concludes the Lantronix Xport setup
sales@sensoraccess.co.uk
www.sensoraccess.co.uk
+44 (0) 1273 242 355
Advertisement
Need help?
Do you have a question about the IC2001 and is the answer not in the manual?
Questions and answers