Swivel Version; Swivel Cam Adjust - Dynamic Mounting Down and Out Motor Mount Installation Directions Manual

Swivel Version

The swivel version of the mount can be manually swiveled in the out and bottom positions as shown in Figure 6. When raising the
mount to the top positon there is an adjustable came that can be set so that the TV will not hit the wall or shelf, while still allowing the
maximum amount of swivel.
Figure 6 Swivel

Swivel Cam Adjust

To avoid the TV hitting the wall or shelf, adjust the Swivel Cam and tighten the Cam Nut shown in Figure 7. Run the TV up to ensure
it is set so that the TV can swivel as much as possible without it hitting the Wall when it goes past the out position. There are 2 cams,
1 per side that can be adjusted.
Figure 7 Swivel Cam Adjust
Install Video at www.DynamicMounting.com/Install
5