Advertisement
Mounting
Mounting positions
IP54 protection in following mounting positions
1)
Maintenance
The VAV compact controllers are maintenance-free.
Mounting:
Do not open the VAV compact controllers
Do not use the accessory mounting holes for fixation of the VAV compact controllers
If necessary, disconnect electrical connections from the terminals
The VAV compact controllers must be correctly adjusted to the VAV box before commissioning.
Disposal
Warranty
Technical data on specific applications are valid only together with Siemens products listed
under "Equipment combinations". Siemens rejects any and all warranties in the event that
third-party products are used.
Note
When using the actuators in connection with components of other manufacturers,
correct functioning must be ensured by the user, and Siemens will assume no
responsibility.
8 / 14
Siemens
Building Technologies
Not to be used for fixation of the actuator, use anti-rotation-bracket instead.
The device is considered an electronics device for disposal in terms of
European Directive 2012/19/EU and may not be disposed of as domestic
garbage.
Dispose of the device through channels provided for this purpose.
Comply with all local and currently applicable laws and regulations.
1)
Accessory mounting holes
Cf. mounting instr. A6V10523083
A6V10631832_en--_b
2016-01-29
Advertisement
