Installation; Cable Handling Guidelines - Black Box JPM1105A Manual

12-PORT BASIC TELEPHONE MODULE

3.1 Cable Handling Guidelines

• Do not route data cables through the same cable
holes as the AC power cables.
• For safety, separate all data cables from parallel AC
power lines by at least 6 inches (15.2 cm)
whenever possible.
• Avoid kinking the cable.
• Do not attach cable tie-downs too tightly. The
cable-fastening hardware should not compress the
cable sheath.
• Do not bend the cable sharply. Be especially
careful to place the cables properly in the cable
management after passing them through the
holes, since the edges of the hole can compress or
even damage the cable sheath.
• When installing an individual module in the
SOHO Network Box, place it above or below the
interfacing module (if possible). This will
eliminate excessive cable crossing.
6

3. Installation