Installing A Module In The; Soho Network Box - Black Box JPM1105A Manual

• Follow all warnings on the products.
• For your safety, do not use this or any electrical
product near water (unless it is specifically
designed for wet areas).
• Do not install wiring during thunder and lightning
storms.
• Use caution when handling or installing any
computer, telephone, video, or electrical devices.
3.2 Installing a Module in the SOHO Network Box
1. Determine the area for installation.
2. Position the metal tabs on the left side of the
module at a 45-degree angle and slide them into
the rail holes on the SOHO Network Box (see
Figure 2-1).
3. Insert the metal tabs on the right side of the
module into the rail.
4. Press the button to fasten the module to the

SOHO Network Box.

CHAPTER 3: Installation
7