Installation - Black Box AC910A User Manual

VOICE CONFERENCING SYSTEM
When you install or modify telephone wiring, always follow basic safety
precautions to reduce the risk of fire, electrical shock, and injury. These
precautions should include the following:
• Never install telephone wiring during a lightning storm.
• Never install a telephone jack in a wet location unless the jack is
specifically designed for this.
• Never touch uninsulated telephone wires or terminals unless the
line has been disconnected at the network interface.
To install the Voice Conferencing System, take these steps:
1. Place the VCS's main module on a conference table or desk.
2. Plug one end of the 8-conductor cable (the cable with the larger RJ-45
connectors) into the open socket on the bottom of the VCS's main
module. Plug the other end into the larger socket (labeled "TO BASE
UNIT") on the bottom of the power-interface module. Refer to the
illustration below.
8

3. Installation

CAUTION!
CHAPTER 3: Installation