Advertisement
Quick Links
BEFORE PROCEEDING: MAKE SURE PUMP
INTAKE COVER IS SNAPPED ON SECURELY
1
1. First remove cover, then water
reservoir, then filter reservoir.
NOTE: Do not remove
strainer.
4
4. Replace filter reservoir unit.
Reservoir locks strainer in
place.
follow us online
petmate.com
Bowl
Remove
grommet.
2
2. Press pump unit firmly in area marked
"Pump". Suction cups must grip the
bottom of base.
5
5. Fill bowl with water to 1/2"
below rim. Replace water
reservoir, and replace cover.
Doskocil Manufacturing Company, Inc. dba Petmate • PO Box 1246, Arlington, TX 76004-1246
1-877-PETMATE • www.petmate.com
© Doskocil Manufacturing Company, Inc. 2010
replacement pump
instructions
Overhead
View
3
3. Open grommet and close around power
cord. Insert grommet into base.
6
6. Insert pump connector cord into AC
adapter. Plug into electrical socket.
NOTE: Pump may take two to three
minutes before it begins circulating
water down the slide. If it does not, un-
plug in-line connector and re-connect.
missing
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Petmate Fresh Flow
Summary of Contents for Petmate Fresh Flow
- Page 1 If it does not, un- plug in-line connector and re-connect. follow us online Doskocil Manufacturing Company, Inc. dba Petmate • PO Box 1246, Arlington, TX 76004-1246 1-877-PETMATE • www.petmate.com petmate.com © Doskocil Manufacturing Company, Inc. 2010...
- Page 2 TROUBLE SHOOTING Introducing your pet to the Pet Fountain Each animal’s response to the Pet Fountain will be different depending on age, temperament and breed. Some will be nervous because of the flowing water and the low hum of the pump. We recommend placing the unit unplugged next to the pet’s normal water bowl with water in it for at least a week.
- Page 3 MAINTENANCE WARNING: Do not let pump run dry. When pump makes air suction noise and water gurgling sound, water level is extremely low. Add water immediately. 1. NOTE: Pump may take 2-3 minutes before it begins circulating water. This allows time for air to be removed from pump. The pump is silent. You will not hear anything except the flowing of water down the slope.
- Page 4 BEFORE PROCEEDING: MAKE SURE PUMP Side View. Filter reservoir. INTAKE COVER IS SNAPPED ON SECURELY Filter reservoir will rest behind alignment wall. Overhead View 1. Press pump unit firmly in area 2. Route in recess channel behind cord 3. Place filter reservoir with filter installed marked “Pump”.
Need help?
Do you have a question about the Fresh Flow and is the answer not in the manual?
Questions and answers