Special Mode; Special Mode Setting Button - Denon AVR-E200 Service Manual

SPECIAL MODE

Special mode setting button

b P ress the X button to turn on the power while pressing both the button A and the button B at the same time.
Mode
µcom/DSP/OSD Version display
mode
Initialization mode
Mode for switching tuner frequency
step
b When power is turned on, pressing both buttons A and B at the same time for 3 seconds or more.
Mode
Select the video signal format
Mode for preventing remote control
acceptance
Displaying the protection history
mode
SOURCE SELECT 0
Button A Button B
STATUS DIMMER
SOURCE SOURCE
SELECT 0 SELECT 1
SOURCE
DIMMER
SELECT 1
Button A Button B
SOURCE
STATUS
SELECT 0
STATUS DIMMER
PRESET+ STATUS
SOURCE SELECT 1
X
Firmware versions such as Main, DSP or OSD are displayed
in the FL display. Errors are displayed or when they occur.
(Refer to 17 pagepage.)
Backup data initialization is carried out. (Refer to 9
pagepage.)
---E2 model only---
Change tuner frequency step to AM9k/FM50kHz STEP or
AM:10k/FM:200kHz.
Select with the "SOURCE SELECT 0 ", "SOURCE SELECT
1 " and "STATUS" button change video format NTSC or PAL.
Operations using the remote control are rejected.
"REMOTE LOCK:ON" is displayed in FL display.
(Mode the cancellation: Execute the same button operations
as when performing setup.)
The protection history is displayed.
(Refer to 18 page)
STATUS
DIMMER
16
Contents
Contents