Toro 30810 Installation Instructions Manual page 8

Figure 17
1. Cut the hose here.
2. Tee fitting
C. Secure all 3 hoses to the tee fitting with hose
clamps (7/8 inch).
D. Install the short hose to the port in the
oil-cooler-return hose.
3. To the deck-lift valve
4. From the oil cooler
5. On the right frame, locate the deck-lift-valve assembly
(Figure 18).
1. Plug
6. Remove the plug from the left side of the valve
assembly (Figure
7. Thread the hydraulic valve fitting into the opening of
the valve (Figure
1. Hose
8
Figure 18
2. Valve assembly
18).
19).
Figure 19
2. Straight fitting