Installing The Battery In The Remote Control - Samsung HW-K360 User Manual

Controlling the Soundbar using Your TV Remote Control
1. Press and hold the
2. "ON - TV REMOTE" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
c TV menus differ by manufacturer and model. Refer to the TV's user manual for further information.
c Only the VOL +/- and MUTE buttons will be available to control the Soundbar.
c This function is not available when the Soundbar is in the TV SoundConnect mode.
c Manufacturers supporting this function:
• VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA
• This function may not be compatible with your TV's remote depending on the remote control's
manufacturer.
c To turn off this function, press the
Soundbar's display.

Installing the Battery in the Remote Control

1. Use a suitable coin to turn
the remote control's battery
cover counterclockwise to
remove it as shown in the
figure above.
8
9
8
9
SOUND button for more than 5 seconds while the Soundbar is turned on.
SOUND button for 5 seconds. "OFF - TV REMOTE" appears on the
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when
inserting the battery. Put the battery
cover on, and then align the '●'
marks side by side as shown in the
figure above.
· 12 · English
Bluetooth Press to turn the Bluetooth POWER On
POWER
function on and off. When the Bluetooth
POWER On function is on,
ON - BLUETOOTH POWER appears in
the Soundbar's display.
SOUND You can select from TREBLE, BASS,
CONTROL SUBWOOFER LEVEL, or AUDIO SYNC.
• Press to select TREBLE, BASS,
SUBWOOFER LEVEL, or AUDIO
SYNC.
Then, use the ,  buttons to adjust the
Treble or Bass volume from -6 ~ +6,
SUBWOOFER LEVEL volume from -12,
-6 ~ +6.
• If the video and audio between the TV
and your Soundbar are not
synchronized, select the AUDIO SYNC
in Sound Control, and then set audio
delay between 0~300 milliseconds by
using the ,  buttons.
• Each time you press and hold this 
button, ON-POWER LINK and
OFF-POWER LINK alternate.
3. Use a suitable coin to turn
the remote control battery
cover clockwise as far as it
will go to fix it in place.