Functional Basics; Functional Description - Stanley M-Force Operation And Maintenance Manual

Functional Description

For years, STANLEY swing door operators have set the standard for high-volume and high-performance.
Today, the M-Force™, Magic-Swing™ and Magic-Access™ operators combine this tradition of excellence
with the latest in material and electronic technology to give you the most advanced swing door operator
made.
The electro-mechanical design on the M-Force™, Magic-Swing™ and Magic-Access™
operators convert electrical energy directly into mechanical motion. The control box
features an advanced solid-state design with no moving parts and a motor control
system to minimize heat for increased electronic component life.
The M-Force™, Magic-Swing™ and Magic-Access™ operators are power-open,
spring-close operators that have built-in emergency door release capabilities with
controlled swing door return. Spring energy closes the door, with the speed
controlled by using the motor as a dynamic brake.
In case of power failure, the M-Force™, Magic-Access™ and Magic-Swing™,
operators function as manual door closers in the direction of swing.
The M-Force™, Magic-Swing™ and Magic-Access™ operators can be used with
controls that STANLEY offers including activation sensors (matless controls), push
plates, pull cords, wireless and wired push plates and access control.
The safety system uses a combination of active infrared technology and
microprocessor technology to provide maximum user safety at all times without
the use of mats. Door-mounted sensors continually monitor the swing path area.
The microprocessor interprets this information and prevents the door from
opening and closing, if any pedestrians or other obstructions are present. The
microprocessor and sensors are tuned in to establish safety zones by the trained
service technician.
An activation sensor and/or wall switch is used as an activating device with the
system. The entire system is programmed for "fail-safe" operation.
An automatic door is a complicated assembly of mechanical, electrical and electronic components that
make up a system that you depend on to provide convenience and safety to all users. Lack of maintenance
on your door equipment can have significant implications on the cost of ownership. STANLEY's total
service and properly scheduled maintenance will extend the life of your equipment and keep it performing
to its full potential.
Toll Free: 800 7 ACCESS (1 800 722-2377)
Service: 888-DOOR-444
Pg. 5
203917 Rev. D
11/2019