Register - Ferrofish B4000+ Manual

REGISTER

Using the three keys Pedal, Lower, Upper you choose which
register is attached to the drawbars. The actual setting is shown
in the top part of the display.
By long pressing one of these keys you can copy the drawbar
positions in the corresponding register. By double-clicking the
key the register properties can be set.
First select the function by pressing the appropriate
key, then change the parameters by turning the
knobs A-F. The assignment of these knobs can be
found on the B4000+ printing, or alternatively are
marked on the TFT.
The most important functions are accessible directly
by pressing the appropriate keys. Less used functions
(red printing) are called by long pressing the key.
Some functions have more than one page. Press the
key again to get to the other pages.
Operation
4