Pedal - Ferrofish B4000+ Manual

Settings
Switch: 2state ↔ 3state
2state switches (On-Off) are commercially available.
However, since the Rotor has three positions, you can also
connect a special switch with three positions, using a stereo-
phone jack. This switch should connect tip with sleeve, and
ring with sleeve.
Switch: switch ↔ key
Alternatively to a switch, you can also connect a momentary
key. When using a key, every keypress advances the Rotor by
one position.
Switch: normal ↔ invert
This setting reverses the function of the switch plug.

Pedal

Setup
Press
Please insert a pedal in the plug on the back of the B4000+.
25
again to adjust the range for the volume pedal.
ADDITIONAL FEATURE
ADDITIONAL FEATURE
ADDITIONAL FEATURE