Version; Show Num; Invert Cc7 / Cc11 - Ferrofish B4000+ Manual

The minimum and maximum value can be set with the knobs A
and B. The arrows show the actual position of the pedal. The
pedal function can be inverted with knob C.

Version

Here you find the firmware version and the serial number of
your B4000+. Please check our website for new firmware
versions.
show Num.: no ↔ yes
Most settings of the B4000+ are shown as rotary
potentiometer, but internally stored as MIDI values between 0
and 127. Sometimes it makes sense to see this MIDI value in
addition to the potentiometer. Set this switch to „on" to
display the numeric value.

invert CC7 / CC11:

MIDI Controllers 7 and 11 are used for volume and
expression. Most MIDI pedals send 127...0 for loud...quiet.
But there also exist pedals, which function is reversed. In this
case set CC7 or CC11 to invert, so the pedal can be used as
normal.
Settings
ADDITIONAL FEATURE
ADDITIONAL FEATURE
26