Kohler K-10441 Installation Manual page 6

3" (7.6 cm)
or Larger
4. Install the Supplies
CAUTION: Risk of restricted waterflow and product damage.
Use extreme care when bending the supply hoses to avoid
kinking and twisting. Hoses must not be taut after installation.
NOTE: If the sink installation requires that you coil the supply hoses
to obtain a good connection, maintain an inside coil diameter of at
least 3" (7.6 cm).
Carefully position the hot and cold water supplies so they will
not interfere with other hoses.
Connect the supply hoses to the supply stops. Left is hot, right is
cold.
Tighten all connections.
1059390-2-A
Cold
Cold
Hot
6 Kohler Co.