Related Manuals for Heinner VUM002
Summary of Contents for Heinner VUM002
- Page 1 Instructions Instrucțiuni de utilizare - RO Anleitung - D Eredeti használati utasítás - HU Ръководство за употреба - BG Instrukcja obsługi - PL www.heinner.com VUM002...
- Page 2 MULTI-FUNCTION TOOL Thank you for choosing Heinner! SAFETY INSTRUCTIONS WARNING! ALWAYS WEAR EYE, FACE AND EAR PROTECTION! When operating the tool Check that the switch is in the 'OFF' position before connecting to the power supply. Switch to 'OFF' immediately after completion of the task. Keep the mains cable away from any moving parts or accessories.
- Page 3 MULTI-FUNCTION TOOL e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool.
- Page 4 MULTI-FUNCTION TOOL SPECIFICATIONS Motor size: 300W Input: 230~50Hz No load speed: 10000-22000/min Orbit angle: 3.5 degree Sanding pad size: 90x90x90mm Variable speed: YES USING YOUR MULTI FUNCTION TOOL WARNING! Be sure to disconnect the rotary tool from the power supply before fitting or removing accessory bits.
- Page 5 MULTI-FUNCTION TOOL 2. To remove or change the sanding paper carefully peel off the sanding paper from one of the triangle ends. On/off switch Operating the On/Off Switch 1. To turn the Multi-function Tool on, push the switch to "O" position.
- Page 6 MULTI-FUNCTION TOOL Note: Sanding pad must be kept flat on work piece. Do not tilt the sanding base and use the edge of the sanding paper. This may cause damage to the sanding pad, reducing its ability to hold your sanding paper. Sawing- Square Blade CAUTION: Clamp your workpiece securely if possible and ensure the Multi-Function Tool is not placed on the workpiece before commencing your work.
- Page 7 MULTI-FUNCTION TOOL This item is in conformity with the European Directive EU DEEE (2012/19/EU) and is marked with an electronic and electrical waste logo graphically represented in the image below. This icon shows that DEEE should not be collected with household waste but separately.
Need help?
Do you have a question about the VUM002 and is the answer not in the manual?
Questions and answers