Setting Mode - Samsung DW50R4070BB User Manual

Setting mode

You can change the sound, auto door open function, rinse aid level, and water hardness
settings to your preference.
Entering the Setting mode
1. Turn the dishwasher on.
2. Press and hold the AUTO (DW50R4070BB / DW50R4060BB model) or Normal
(DW50R4050BB / DW50R4040BB models) cycle button for five seconds within 60
seconds from turning on the dishwasher.
- When you entered the Setting mode, the display will show "0:00".
Sound setting
You can turn the sound on or off.
1. Press the Lower rack only (DW50R4070BB / DW50R4060BB model) or Half load
(DW50R4050BB / DW50R4040BB models) button to select the sound setting menu.
- The display shows the current setting. (Default setting: "U1")
2. Press the AUTO (DW50R4070BB / DW50R4060BB model) or Normal (DW50R4050BB /
DW50R4040BB models) cycle button to change the setting.
- U0: Sound off
- U1: Sound on
3. Wait 5 seconds to save the setting.
Auto door open function setting (applicable models only)
You can set the dishwasher to automatically open the door after each cycle for better
drying results.
1. Press the Rinse Add button to select the auto door open function setting menu.
- The display shows the current setting. (Default setting: "A1")
2. Press the AUTO (DW50R4070BB / DW50R4060BB model) or Normal (DW50R4050BB /
DW50R4040BB models) cycle button to change the setting.
- A0: Function disabled
- A1: Function enabled
3. Wait 5 seconds to save the setting.
DW4000RM(A5)_IB_DD81-02709E-01_EN.indd 43
English 43
2019-07-10 10:35:25