Toro Flex-Force Power System 51825T Operator's Manual
60v max axial blower
Hide thumbs
Also See for Flex-Force Power System 51825T:
- Operator's manual (108 pages) ,
- Manual (112 pages) ,
- Operator's manual (13 pages)
Related Manuals for Toro Flex-Force Power System 51825T
Summary of Contents for Toro Flex-Force Power System 51825T
- Page 1 Form No. 3432-888 Rev B Flex-Force Power System ™ MAX Axial Blower Model No. 51825T—Serial No. 319000001 and Up *3432-888* B Register at www.Toro.com. Original Instructions (EN)
- Page 2 II. Preparation Keep bystanders and children away from the operating area. Use only the battery pack specified by Toro. Using other accessories and attachments may increase the risk of injury and fire. Plugging the battery charger into an outlet that is not 100 to 240 V can cause a fire or electric shock.
- Page 3 68°C (154°F) or incinerate III. Operation it. Replace the battery pack with a genuine Toro battery pack only; using another type of battery Avoid dangerous environments—Do not use the pack may cause a fire or explosion. Keep appliance in rain or in damp or wet locations.
-
Page 4: Safety And Instructional Decals
Do not attempt to service or repair the appliance, Do not dispose of the battery in a fire. The battery pack, or battery charger except as cell may explode. Check with local codes for indicated in the instructions. Have an Authorized possible special disposal instructions. -
Page 5: Assembling The Blower
Setup Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. Blower tube Assemble the blower. Note: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer Charging the Battery Pack (page Product Overview Assembling the Blower... -
Page 6: Operation
Operation WARNING The blower can throw debris, possibly causing serious personal injury to you or bystanders. • Do not blow hard objects, such as nails or bolts. • Do not operate the blower near bystanders or pets. • Be careful of blowing direction (i.e., blow away from bystanders, windows, automobiles, etc.). -
Page 7: Charging The Battery Pack
Removing the Blower Tube Press down on the tab latch to separate the blower tube from the blower (Figure g273159 Figure 4 1. Tube latch g290533 Figure 6 1. Battery pack cavity 5. LED indicators (current Removing the Battery from charge) 2. - Page 8 Storage Important: Store the tool, battery pack, and charger only in temperatures that are within the appropriate range; refer to Specifications (page Important: If you are storing the tool for a year or longer, remove the battery pack from the tool and charge the battery pack until 2 or 3 LED indicators turn green on the battery.
-
Page 9: Troubleshooting
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The tool does not start. - Page 10 Problem Possible Cause Corrective Action It is difficult to remove the battery pack 1. The battery pack/tool is new or there 1. Clean the terminals on the battery from the tool. is corrosion in the battery terminals pack and the tool with a dry rag. Then and/or the terminals on the tool.
- Page 11 Notes:...
- Page 12 The Toro Company (“Toro”) respects your privacy. When you purchase our products, we may collect certain personal information about you, either directly from you or through your local Toro company or dealer. Toro uses this information to fulfil contractual obligations - such as to register your warranty, process your warranty claim or to contact you in the event of a product recall - and for legitimate business purposes - such as to gauge customer satisfaction, improve our products or provide you with product information which may be of interest.