EXP MODE Switch – Determines which parameter the expression pedal
controls.
TAP DIVIDE Switch – Sets the note type based on tapped in quarter
notes.
SHAPE Switch – Sets the waveform shape of the LFO.
INPUT Jack – Plug your instrument or the output of another effects pedal
into this ¼" jack. The input impedance is 2.2M.
OUTPUT Jack –Outputs the Blurst's audio signal. The output impedance is
220.
EXP Jack – Plug a TRS expression pedal or other CV device (such as an EHX
8-Step Program) into this ¼" jack.
9V Power Jack – Plug the output of the AC adapter into the 9V power jack
located at the top of the Blurst. The Blurst draws 56mA at 9VDC with a
center negative plug. The Blurst accepts Boss
Adapters capable of delivering at least 100 mA.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and return the
enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its
discretion, a product that fails to operate due to defects in materials or workmanship for a period
of one year from date of purchase. This applies only to original purchasers who have bought their
product from an authorized Electro-Harmonix retailer. Repaired or replaced units will then be
warranted for the unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please contact the
appropriate office listed below. Customers outside the regions listed below, please contact EHX
Customer Service for information on warranty repairs at info@ehx.com or +1-718-937-8300. USA
and Canadian customers: please obtain a Return Authorization Number (RA#) from EHX
Customer Service before returning your product. Include ̶ with your returned unit ̶ a written
description of the problem as well as your name, address, telephone number, e-mail address,
RA# and a copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
55-01 2ND STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email:
info@ehx.com
®
and Ibanez
®
style AC
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
- FCC COMPLIANCE -
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. If the device is not installed and used in accordance
with the instructions, it may cause harmful interference to radio communications and void the user's authority
to guarantee the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
Note:
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.
To hear demos on all EHX pedals visit us on the web at
Email us at
www.ehx.com
info@ehx.com
Need help?
Do you have a question about the Blurst and is the answer not in the manual?
Questions and answers