Using A Wired Connection To The Tv; Connecting Using An Optical Cable - Samsung HW-S40T Full Manual

05 USING A WIRED CONNECTION TO THE TV

Connecting using an Optical Cable

When the audio in a broadcast is encoded in Dolby Digital and the "Digital Output Audio Format" on
your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on
the TV is changed, you will experience better sound quality. (The TV menu may use different words for
Dolby Digital and PCM depending on the TV manufacturer.)
Pre-connection Checklist
• When you use an optical cable and the terminals have covers, be sure to remove the covers.
1. With the TV and Soundbar turned off, connect the DIGITAL AUDIO IN (OPTICAL) port on the
Soundbar and the OPTICAL output port on the TV with the optical cable, as shown in the figure.
2. Turn on the Soundbar and TV.
3. Press the (Source) button on the top panel or remote control, and then select the "Digital
Audio In" mode.
4. The TV sound is output from the Soundbar.
OPTICAL OUT
White On -> Off
LED
Indicator
Optical Cable
DC 24V
Top of the Soundbar
ENG - 15
Bottom of the Soundbar
DIGITAL AUDIO IN
(OPTICAL)
"Digital Audio In"
SERVICE