Advertisement
o
Attach the cut template sheet to the backing board.
p
Pour slightly more rhinestones than necessary on top of
the pattern, and then use the positioning brush to position
them in the holes.
• Gently move the brush in a circular motion.
• If it is difficult to position the rhinestones in the holes with the
brush, use the rhinestone pick-up tool. Press the end of the
rhinestone pick-up tool straight down onto a rhinestone, and
then pick up the rhinestone and place it into the hole. Slide the
rhinestone pick-up tool off to the side to release the rhinestone.
• Before using the rhinestone pick-up tool, check that the
silicone part is pushed into the tool. It may be difficult to pick
up the rhinestones if the silicone part is dirty. Wipe off any dust
with a dry cloth.
• When positioning rhinestones larger than SS10 into holes,
place them into position one at a time.
• With patterns using both SS10 and SS20 rhinestones, position
the SS10 rhinestones first.
q
After all pattern holes have been filled with rhinestones,
cut the transfer sheet slightly larger than the pattern, peel
off the backing, and then attach the transfer sheet to the
top of the rhinestones.
• Use your hands to firmly press down on the transfer sheet so
that it is affixed to all rhinestones.
r
While checking that the rhinestones are attached to the
transfer sheet, slowly peel the transfer sheet from the
template sheet. Then, place the transfer sheet with the
rhinestones attached on the fabric to be decorated.
s
Place fabric underneath and on top of the fabric with the
transfer sheet attached, and then use an iron on a medium
temperature setting (140 to 160 °C (284 °F to 320 °F)) to
press down on the top fabric for 45 to 60 seconds.
• Use ironing board with standard pressing surface. It may be
easier to attach the rhinestones if cushioned fabric is placed
underneath.
t
After ironing, remove the fabric that was placed
underneath and on top, and then, while checking that the
rhinestones are attached to the fabric, slowly peel off the
transfer sheet.
• Before peeling off the transfer sheet, make sure that it has
cooled.
• If the rhinestones are poorly adhering after the transfer sheet
has been peeled off, re-place the fabric underneath and on top,
and then press down on the pattern again with an iron.
Note
• When storing a template sheet with rhinestone holes cut
out, store it with its backing attached to the adhesive side.
Use the spatula to remove template sheet cutouts
remaining on the backing.
©Disney
6
Advertisement
