Safety Precautions - Omron S8V-CP Series Manual

S8V-CP

Safety Precautions

Be sure to read the precautions for all models in the website at: http://www.ia.omron.com/.
Warning Indications
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
CAUTION
moderate injury or in property damage.
Precautions
Supplementary comments on what to do or
for Safe Use avoid doing, to use the product safely.
Supplementary comments on what to do or
Precautions
avoid doing, to prevent failure to operate,
for Correct Use
malfunction or undesirable effect on product
performance.
Meaning of Product Safety Symbols
Caution against electric shock
Used to warn of the risk of electric shock under
specific conditions.
Caution against high temperatures
Used to warn of the risk of minor injury caused by
high temperatures.
General instructions
Used for general mandatory action precautions for
which there is no specified symbol.
10
CAUTION
If a wire is disconnected, electric shock may result.
Insert the solid wire or ferrule straight into the
terminal block until the end touches the terminal
block.
Minor burns may occasionally occur. Do not touch
the Product while power is being supplied or
immediately after power is turned OFF.
Minor electric shock, fire, or Product failure may
occasionally occur. Do not allow any pieces of metal,
conductors, or cuttings from installation work to
enter the Product.
The Product will be damaged. Do not incorrectly
connect the polarity of power input terminals.
Fire, or Product failure may occasionally occur.
Do not apply voltages that exceed the input voltage
allowable range.
Unexpected output may occasionally occur.
Be careful sufficiently not to accidentally press the
push button with indicator during Manually output
OFF state.