Product Description; Warnings; Required Tools - DAGU Doodle Bot Manual

Product Description

Thank you for selecting the Doodle Bot for your next do-it-your-self project. This kit
allows you to build and program a small drawing robot that can write messages and draw
pictures using a large pen, crayon or chalk stick.
Product Features
1. Arduino compatible robot controller with USB interface.
2. Laser cut, transparent acrylic base plate.
3. 2x high torque geared motor with ball bearing.
4. 1x high torque miniature servo with ball bearing.
5. Rubber tires and pen gripper.
Build it now! Realize your dream! Create your next masterpiece!
！

Warnings:

Opened packages can not be returned. Please check package contents before opening.
Read the instructions carefully before assembly.
Use all tools carefully.
Small parts are a choking hazard. Keep this kit away from young children and babies
during construction and operation.
Not for children under 8 years. Not to be used by children except under adult
supervision.
Observe the correct polarity of the battery.
Keep the battery dry at all times.
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
Remove the battery if the kit is not used for a long period of time.
Necessary Tools:
Please read this manual thoroughly before you start assembling the kit. Please follow the
assembling instructions exactly to avoid problems. If you work accurately and follow the
instructions in this manual exactly, you will quickly assemble your Doodle Bot.
Before you start you must prepare the following tools:
PHILLIPS SCREW DRIVER
(included in kit)
4x AAA BATTERY
(not included)
PEN / CRAYON / CHALK
(not included)