Using Your Refrigerator; Setting The Controls; Changing The Control Settings; Power Saving Control - Whirlpool ET22ZK Use & Care Manual

Using your refrigerator
Setting the controls.. .
Glve the refrigerator time to cool down com-
Controls for the refrigerator and freezer ore In the
pletely before adding food.
[This may take sev-
refrigerator. When the refrigerator IS plugged In for
erol hours.)
the first time
These settings should be about right for normal
household refrigerator usage.
The controls will be set about right when milk or
y@' '9' isfirm.
juice is as cold as you llke and when ice cream
Do
not
block the
air outlet
on the control panel
1 Set the TEMPERA- 2. Set the AIR CON-
Blocking it con slow the air movement needed to
TURE CONTROL to 3.
TROL to B.
keep temperatures at the level you set.
Changing the control settings.. .
If you need to adjust temperatures in the refriger-
l
Adjust the Temperature Control first
ator or freezer, use the settings listed in the chart
l
Wait at least 24 hours between adjustments
below.
l
Then adjust the Air Control, if needed
CONDITION :
If Freezer
If Refrigerator
Section
IS
I
Section 1s
TOO WARM
TOO WARM
QUESTIONS?
.coIl your
COOL-LINE -
service
assistance
telephone
number
(page 15).
If Refrigerator
Section is
TOO COLD
If ICE Isn't
MADE FAST ENOUGH
If BOTH SECTIONS
ore TOO WARM
Door opened often
REASONS:
Large amount of food added
Very cold room temperature
Door opened often
[can't cvcle often enouahl
Controls not set correctly
Large amount of food added
for your ccnditlons
Heavy Ice usage
Room temperature too worm
Very cold room temperature
(can't cycle often enough)
Door opened often
Large amount of food added
Very worm or very cold
room temperatures
RECOMMENDED SETTINGS:
Temperature Control
4
Air Control C
Temperature Control
4
Air Control
A
Temperature Control 2
Air Control
B
Temperature Control 3
Air Control
A
Temperature Control 4
Air Control
B
Power Saving Control.. .
The Power Saving Control
on the Control Con-
sole operates electric heater around the door open-
1. Use the "OFF" set-
2. Use the "ON"settl&
Ings. These heaters help keep moisture from forming
tlng when humidity
if moisture forms
on the outside of the refrigerator low
on the outside of the
refrigerator.
5