Whirlpool ET22MM Use & Care Manual page 6

Adjusting the refrigerator shelves... TO remove
glass
shelves:
Shelves can be adjusted to match the way you use
1. Tilt up at front.
your refrigerator. Glass shelves are strong enough to
2. Lift up at back.
hold bottles, milk and other heavy food items,
3. Pull shelf straight out.
Gloss shelves are
heovy Be careful.
To replace:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Ilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing freezer shelves...
1 Lift front slightly.
2 Lift back off
suppo~%
3. Replace in reverse order.
III II
Lltt the Front
Then the Back
I / I
Adjusting the Door Shelves...
lo remove door shelves:
I. Lift up shelf.
2. Tilt up at front.
3. Pull shelf straight out.
To replace door shelves:
1. Tilt up front of shelf until
hooks fit into slots in the
shelf support
2. Lower front of shelf to level
position.
3. Push shelf down.
Removing crispers and crisper cover.. .
Pull Out to Stop. Lift the Front
Remove the
Glass Insert,
Lift the Frame Front,
then the Back
Glass is heavy.
Be Careful.
To Remove the Crispers:
I. Slide crisper straight out to stop, lift front, then slide
the rest of the way out.
2. Replace in the reverse order
To Remove fhe Cover:
I. Push up glass insert from bottom, then slide out with
both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling up and out.
4. Remove metal cover support.
To Replace the Cover:
1. Replace metal cover support on wall supports in
front section of cabinet.
2. Fit back of cover into notch supports on walls of
refrigerator, then lower into place.
3. Slide back of glass insert into place, then lower
front.
Moving the meat pan and cover...
Pull Out to Stop. Lift the
Front and Pull Again.
Glass is heavy.
Be Careful.
To Remove fhe Meat Pan:
I. Slide the meat pan out to stop.
2. Lift the front.
3. Slide the pan the rest of the way out.
4. Replace in reverse order.
To Remove fhe Cover:
I. Tilt front of cover up, lift at back, and pull straight
out.
2. Replace in reverse order.